Home › Models › Heritage tram-style vehicles

Heritage Tram-Style Vehicles on Rubber Tyres

Models that reinterpret the familiar lines of historic trams in a rubber-tyred vehicle for use on site. They run without rails. Reference: Edirne.

Edirne Municipality tram, red-black, front view
Edirne Municipality, second tram model, in the workshop, front three-quarter view
Edirne Municipality, second tram model, in the workshop, front view
Tram interior with announcement units
Illustrative image: Airport
Illustrative image: Airport
Nostalgic tram, interior and exterior
24 seated passengersDiesel, petrol or electricMotor from 60 kW, peak 100 kW80–200 kWh batteryUp to 20% gradientECE R100-certified batteryOptional guide railBi-directional option: 2 × 24 = 48 passengers

Values vary with configuration and operating conditions; the technical values for your project are confirmed in the quotation.

Inspired by Taksim

The design is inspired by the nostalgic tram on Taksim Square in Istanbul. It runs on rubber tyres, without rails.

The interior is part of the design

Passenger layout, door positions, boarding, the driver’s view and climate conditions are considered together. Assessed for use in controlled areas.

Multi-car, bi-directional passenger tram

There is also a high-capacity passenger tram made up of several cars. With a driver’s compartment at both ends, it can be driven in two directions without turning, which suits areas where manoeuvring is limited and turning is not possible. Two cars of 24 passengers each carry 48 passengers; capacity can be increased. A twin-motor, four-car configuration can carry up to 200 passengers, seated and standing. It is very efficient on long routes. It can also be considered for airports; suitability and the operator’s approval are assessed separately in such areas.

Who is it for?

It is considered for historic city centres, squares, archaeological and cultural sites, tourist streets, hotels and controlled sightseeing routes. Alongside the historic fabric it offers a striking sightseeing experience that visitors remember.

Nostalgic look, modern infrastructure

The familiar lines of historic trams are reinterpreted on a rubber-tyred vehicle. This gives a tram feel without the need for rail infrastructure. Colours, corporate applications and themed details are set within the project. An optional guide-rail option is also available.

Modern design for modern city centres

Vehicles with a modern tram look can also be built specially for modern city centres. Besides sightseeing, these vehicles are also used as a means of transport.

Capacity and power

It offers a capacity of 24 seated passengers. Diesel, petrol or electric options are available; a motor from 60 kW (peak 100 kW) and an 80–200 kWh battery are considered. Gradient capacity is up to 20%. The electric option is quiet, exhaust-free and suited to historic surroundings.

Multilingual commentary and guiding

With a guide, or with GPS-triggered multilingual commentary, visitors can learn about historic buildings in their own language. Our Edirne and Lefkoşa references use GPS commentary in 16 languages.

Reference: Edirne

The Edirne Sightseeing Tram entered service in 2024, starting from Selimiye Square and passing among historic buildings. Right-hand drive, GPS commentary in 16 languages and a heat-resistant radiator were used.

Advertising and revenue opportunities

The tourist train’s large outer surfaces and its above-floor billboard areas can be used for advertising and announcements. Screens can also be fitted inside the wagons for visual advertising and announcements; this option is assessed within the project scope. Ticket revenue can be earned, and because local businesses can advertise, it also supports the local economy. Advertising is planned according to local regulations and permits.

What do we need for a quotation?

Route length, steepest gradient, road width and turning areas, number of stops, passengers to carry at peak hours, your preferred engine type, where it can be charged and your preferred look. With this information we can quote much faster.

4×4 option

Standard production is 4×2. A 4×4 drive option is offered on all models, electric ones included, according to the needs of the project and the request. Ground, gradient and operating conditions are defined together at the quotation stage.

Technical details

Vehicle: 7000 × 2200 × 2250 mm (length × width × height); may vary with capacity and distance. Brakes: hydraulic with vacuum servo, disc or drum. Suspension: parabolic leaf spring.

Optional equipment

Options that can be added: GPS-linked announcements in 16 languages, cameras, a wheelchair ramp, central locking, a multimedia system, custom lighting and stickers, an opening roof, air conditioning and turn signals. What is standard and what is optional is stated in the quotation.

Left-hand drive option

Left-hand drive can be built on all models, as an option, according to the project and the country of use.

Frequently asked questions

Does the nostalgic tram need rails?

No. It is a rubber-tyred vehicle that gives the look and feel of a historic tram and needs no rail infrastructure. An optional guide-rail option is also available.

How many passengers does it carry?

It offers a capacity of 24 seated passengers. For other needs, see the Custom-designed trains page.

Is there an electric option?

Yes. Diesel, petrol or electric options are available; the electric option runs quietly and exhaust-free.